AnyTone 5888UV III, Руководство пользователя

Страница: 16 / 39

11
6
Shortcut Operations
Squelch leVel Setup
This function is used to setup the strength of receiving signal, when the
strength reach a certain level, the calling can be heard, otherwise, the
transceiver will keep mute.
In standby, press and hold
key, meanwhile switch the selector knob
to adjust the squelch level of Main band.
1-20: Total 20 squelch levels available.
OFF: turn off squelch. The background noise always on.
The squelch level shall setup separately for right band and left band.
In standby, press key to switch to HOME
channel, and communicate on HOME channel.
repeat pressing it to return to last channel.
hoMe chAnnel
NOTE
hypeR MeMoRy chAnnel
In standby, press the left or right volume knob will switch the radio work
on hyper channel 1 or hyper channel 2.
In standby, hold key for over 0.5 second to enter Dual Watch mode.
The radio will scan the channel in every 5 seconds. When the radio
receives matching signal, it pause scanning until the signaling disappear.
Repeat above operation to exit Dual watch.
duAl wAtch
FRequency ScAn
chAnnel/FRequency ScAn
In VFO mode, this function is designed to monitor signal of every
communicative frequency point of "step size" you have set.
In VFO mode, press the Main Band
11
key to enter channel scan.
During the scanning adjust the Main band selector knob or press
21
microphone [ UP/DOWN ] key will change the scan direction.
Press
31
key to exit scan.
chAnnel ScAn
In channel mode, press the Main Band
11
key to enter channel scan.
eMeRGency AlARM
To start emergency alarm, hold the right volume knob until the trans
-ceiver displays ALARM and emit alarm. Re-power on the transceiver to
exit alarm. This transceiver has 4 kind of alarm.
In VFO mode, after setting desired freq and
Channel, press then hold until radio
announces"DUDU", LCD displays H icon,
Home channel editing finished.
editinG hoMe chAnnel