Professional
FM Transceiver
15
Resume Factory Default
Once transceiver works abnormally for wrong operations or wrong programming, users can start this
function to resume all functions and channels as Factory Default.
Under standby conditions press [PTT] and [PF1] key synchronously to switch on transceiver. Holding
the two keys until hear transceiver announces "DI" beep then release the keys,the transceiver will
Maintaining and Cleaning
Cover the jack with its opercula when the transceiver is not in use. After long-time use of the
transceiver, keys, control buttons and housing would become dirty. Then, neutral detergent (no
corrosive chemical agent) and wet cloth can be used to clean them.
NOTE: Via programming software can set whether allow to use this function in transceiver, please
reference to the Reset Allowed option in programming software.
BASIC OPERATIONS
factory default.
