10
|
ANYLOAD PS805-B Thermal Receipt Printer User’s Manual (V1906)
8.3.1 Connect to 805TS/805BS Indicator or to a compatible weighing
indicator
For older models of 805TS & 805BS ( 805TS-B-16 / 805BS-B-16 & older ), use the
terminals 4, 5 & 6: 4=TXD, 5=RXD, 6=GND
SET THE FOLLOWING PARAMETERS OF 805BS / 805TS INDICATOR:
1.
Baud Rate should be 9600
2.
Mode of Transmission should be “Upon Request”
For the compatible weighing indicator, set the Baud Rate to 9600 and Mode of
Transmission to “Upon Request”. Refer to the diagram above for the wirings.
The TXD signal from indicator goes to the RXD of the printer and the TXD signal
from printer goes to the RXD of indicator. Use the GND to complete the
connection.
FEMALE DB-9 CONNECTOR FROM
PS805-B PRINTER
1
-
4
-
7
-
2
TXD
5
GND
8
-
3
RXD
6
-
9
-
SERIAL COMMUNICATION TERMINAL
BLOCK OF 805BS / 805TS INDICATORS
( 805TS-B-17 / 805BS-B-17 & later
models )
1
485-
4
1RXD
7
2RXD
2
485+
5
1TXD
8
2TXD
3
1GND 6
2GND
Note, use only the terminals 6 to 8 to connect
your RS232 printer
