8
|
ANYLOAD EB300 Precision Balance Operations Manual (V1611)
Once memory position has selected by and key , press and
display will show a number. To modify or set a new tare value, use , ,
and to enter the desired value.. To finish, press key and tare
will be saved. Press again and follow the above procedure to enter
another tare value. To quit, press to escape to weighing mode.
Tare memory use
In weighing mode, with empty plate, press longer than a second until
“TLU XX“ is shown, where XX is the last digit of the TARE memory saved. To
access to another memory position, press and to surf along the
tare memories until you find the desired memory number
To confirm, press . Display will show tare memory value with negative
sign. Now you can place the object on the plate, and the tare value will be
deducted from weighing value (shows net weight). Then put the actual object
together with the container on the platform and the display will deduct the
container weight as the value we selected above and show the net weight of
the object on the plate, then display indicates net weighing value.
8.3 Auto Tare
This function allows tare function with recipient or box to be done
automatically, without pressing button.
Display detects the first weight (recipient or box), then operates tare’s function
(sets to 0),and gets ready to weigh the product in the box or percipient.
Afterwards, it sets to 0 and you can start the same procedure again repeatedly
without pressing any button.
1) Press menu key and select to enter “ tArE” function, press ENTER key to
confirm, then display will show “trty 0” or “trty 1”, use UP and DOWN keys to
select the right type and press ENTER key to confirm.