Configuration
15 (30)
Wireless settings - Client
Fig. 16
Wireless settings – Client
Wireless Settings - Client
Label
Description
Peer AP SSID
Enter the SSID of the WLAN AP to connect to
Peer AP BSSID
Enter the BSSID (MAC address) of the WLAN AP (if required)
Site Survey
Click to scan for available wireless networks
WDS-Slave Mode
When enabled, the unit will act as a WDS slave on this network.
Security options
See
Wireless settings – AP, p. 14
Wireless settings - Bridge
Fig. 17
Wireless settings – Bridge
Wireless settings - Bridge
Label
Description
WDS Mode
WDS can be set to operate in
Bridge Mode
or
Repeater Mode
. See below for an
explanation of these modes.
Peer MAC Address
Enter the MAC address of each access point and check the
Enable
box.
SSID (Repeater Mode)
Enter an SSID (network name) for the network. All devices must be configured with
the same SSID.
Channel
Enter the WLAN channel to use for the network. All devices must be configured to
use this channel.
Security options
See
Wireless settings – AP, p. 14
Anybus
®
WLAN Access Point IP67 User Manual
SCM-1202-094-EN 1.0
