Page 5
1) Tilt door up at about 45° angle until the Top Hook
on the Hinge Arm is lower than the Top Hook Roller,
2) then pull out of Hinge Slots
Hinge Arm
Top Hook Roller
(2)
(1)
Hinge lock - in
up/locked position
Side of Oven
Rotate the Hinge Lock
to up position (both sides)
(side view)
Step 2
Hinge lock - must be in
up/locked position
Side of Oven
Open the door fully
(side view)
Side of Oven
Hinge lock - in "down/unlocked"
position
Door (fully opened; does not open flat)
Step 1
Step 3
(side view)
The doors can be removed for cleaning. (Assembly instructions)
(Assembly instructions)
Page 6
CLEANING:
1. ALWAYS ALLOW UNIT TO COOL BEFORE CLEANING.
2. The spillage on the ceramic decks should be cleaned periodically. Generally
this can be scrapped out but for hard to clean spillage the following is
recommended :
Turn the unit to the maximum temperature for 30 minutes.
Allow the unit to cool down.
Brush the residue from the deck.
DO NOT USE WATER TO CLEAN THE CERAMIC DECKS !
•
•
•
CLEAN THE STAINLESS STEEL PARTS WITH WATER AND SOAP.
AVOID THE USE OF DETERGENTS CONTAINING ABRASIVE
SUBSTANCES. ALWAYS RINSE WELL AND DRY CAREFULLY
AFTER CLEANING. DO NOT USE PRODUCTS CONTAINING
AGGRESSIVE CHEMICALS, ACIDS OR PRODUCTS WITH
CHLORINE TO CLEAN THE STAINLESS STEEL EVEN IF
DILUTED
!
ALWAYS ENSURE THAT THE UNIT IS DISCONNECTED FROM
THE MAIN SUPPLY BEFORE CLEANING
!
Содержание POA7002R00
Страница 1: ......