Antx DiaLog Elite, Руководство пользователя

Страница: 18 / 28

DiaLog Elite PLC Interface Manual
To program Elite channel mappings to PLC registers:
What you do: What DiaLog says:
Press
Home
1
PROG
(PROG mode)
“Programming mode activated. System ready.
Enter selection.”
Press
9
(Channel Configuration)
“Channel Configuration. Enter channel number.”
Press
7 . 1 .
Valid values are:
1 – 5 for function codes (01 – 05)
“The register type is unknown. Press # if OK or
enter a new selection.”
Press 1 .
“The new register type is coil. Register number is
0. Press # if OK or enter a new value.”
Press 5 . 0 . # .
“The new register number is 50. Digital input
channel 71. Enter selection.”
Press
# . “Channel Configuration. Enter channel number”
Press 7 . 2 .
“The register type is unknown. Press # if OK or
enter a new selection.”
Press
3 . “The new register type is holding. Register number
is 0. Press # if OK or enter a new value.”
Press
1 . 2 . 1 . # . “The new register number is 121. Analog input
channel 72. Enter selection.”
Press # .
“Channel Configuration. Enter channel number”
Press 7 . 3 .
“The register type is unknown. Press # if OK or
enter a new selection.”
Press
5 . “The new register type is write coil. Register
number is 0. Press # if OK or enter a new value.”
Press
1 . 0 . 0 . 1 . # . “The new register number is 1001. Relay output
channel 73. Enter selection.”
.
8
Version 1.2
©
Antx, inc. 2001