
3
P/N 1010772 Rev. H 05/18
Safety Information
Installation
y
Read and understand all
instructions before installing
or using the eated toasterr
y
Install and locate the equipment
only for its intended use as
described in this manual.
y
All electrical connections must
be in accordance with local
electrical codes and any other
applicable codes. The equipment
must be grounded according to
local electrical codes to prevent
electrical shocks. It requires a
grounded receptacle with separate
electrical lines, protected by fuses
or a properly-rated circuit breaker.
y
Electrical ground is required
on this appliance. Consult a
qualified electrician if there is any
uncertainty about whether the
appliance is properly grounded.
y
Do not modify the power supply
cord plug. If it does not fit the
outlet, have a proper outlet
installed by a qualified electrician.
y
Do not use an extension
cord with this appliance.
Operation
y
The heated toaster is furnished
with a properly grounded cord
connector. Do not attempt to
defeat the grounded connector.
y
Do not operate the heated toaster
if it has been damaged or dropped,
if it has a damaged cord or plug,
or if it is not working properly.
y
Do not block or cover any
openings on the equipment.
y
Do not immerse the cord
or plug in water.
y
Keep the cord away from
heated surfaces.
y
Do not allow the cord to hang over
the edge of a table or counter.
Maintenance
y
Do not use abrasive materials;
they can damage the heated
toaster’s stainless steel finish.
y
Do not use corrosive chemicals
in this equipment.
y
Chlorides or phosphates in
cleaning agents (e.g., bleach,
sanitizers, degreasers, and
detergents) can permanently
damage stainless steel equipment.
The damage is usually in the form
of discoloration, dulling of the metal
surface finish, pits, voids, holes, or
cracks. This damage is permanent
and is not covered by warranty.
y
Use only chemical cleaners
that are safe for cast aluminum.
Observe all precautions and
warnings on product labels.
y
Always use a soft, damp cloth
for cleaning. Rinse with clear
water and wipe dry. When
required, always rub in the
direction of metal polish lines.
y
Routine cleaning should be
performed daily with soap,
ammonia detergent, and water.
y
Sponge stains and hard water
spots with a 50% vinegar solution.
y
Rub off finger marks and
smears using soap and water.
y
Do not clean the heated
toaster with a water jet.
Service
y
Inspection, testing, and
repair of electrical equipment
must be performed only by
qualified service personnel.
y
Have the heated toaster serviced
only by qualified personnel.
Contact Antunes Technical
Service for adjustment or repair.
y
Turn the power off, unplug the
power cord, and allow unit
to cool to room temperature
before performing any
service or maintenance.
y
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent,
or a similarly qualified person in
order to avoid an electrical hazard.