background image

VZN V SERIES

2

P/N 1011266 Rev. D 11/16

General

The VZN system is an innovative filtration system that uses 

proprietary multi-bore hollow fiber membranes as well as a 

carbon element to provide the latest innovation in filtration 

technology.
This manual provides the safety, installation, and  

operating procedures for the VZN water filtration system. All 

information contained in this manual should be read prior 

to installing and operating the system.  Your VZN system 

is manufactured from the finest materials available and is 

assembled to strict quality standards. This system has been 

tested at the factory to ensure dependable trouble-free opera-

tion. 

OWNER INFORMATION

TABLE OF CONTENTS

IMPORTANT! Keep these instructions for future reference. If the system changes 

 ownership, be sure this manual accompanies the equipment.

Warranty Information

Please read the full text of the Limited Warranty in this  

manual.
If the system arrives damaged, contact the carrier immedi-

ately and file a damage claim with them. Save all packing 

materials when filing a claim. Freight damage claims are the 

responsibility of the purchaser and are not covered under 

warranty.
The warranty does NOT extend to:
 

•  Damages caused in shipment or damage as result of 

improper use.

 

•  Installation of electrical service.

 

•  Normal maintenance as outlined in this manual.

 

•  Malfunction resulting from improper maintenance.

 

•  Damage from moisture leaking into electrical  

components.

 

•  Damage from tampering with, removal of, or changing 

any preset control or safety device.

Owner Information ...............................................................2

General............................................................................... 2
Warranty Information .......................................................... 2
Service/Technical Assistance ............................................. 3

Important Safety Information ..............................................4
Specifications .......................................................................6

Dimensions......................................................................... 6
Electrical Ratings and Plug Configurations ........................ 6
Replacement Cartridges .................................................... 6
Electrical Cord & Plug Configurations ................................ 6

Performance Data Sheet ......................................................7

Filter Cartridge Capacities.................................................. 7
Performance Claims for Percent Reduction....................... 7

Operation ...............................................................................8

Overview ............................................................................ 8
Manual Flushing ................................................................. 8

Installation .............................................................................9

Unpacking .......................................................................... 9
Equipment Setup ................................................................ 9
Mounting the System ....................................................... 10
Drain Valve Connection .....................................................11
Rinse Valve Connection ................................................... 12

System Inlet Connection .................................................. 12
Filtered Water Permeate Outlet Connection .................... 12
Inlet Water Plumbing ........................................................ 12
Installing a Bypass ........................................................... 13
Starting the Controller ...................................................... 13
Rinsing the Ultra Filter Cartridge...................................... 13
Sanitizing the System and Lines ...................................... 14
Rinsing the Carbon Element and TAC Cartridge ............. 14

Maintenance ........................................................................15

Replacing the Ultra Filter Cartridge.................................. 15
Rinsing and Replacing the Carbon Element .................... 16
Rinsing and Replacing the TAC Cartridge  ...................... 17
System Sanitization .......................................................... 17
Changing the Interval Setting ........................................... 18
Resetting the Timer Program ........................................... 18
Check Permeate Tank Air Pre-Charge ............................. 18

Troubleshooting .................................................................19
Replacement Parts .............................................................20
Notes....................................................................................23
Limited Warranty ................................................................24

Содержание 9700744

























Отзывы: