USER MANUAL
PAGE 9
ANTTRON ©2022
TRM84
Please note that when no services (programs) are added to an output channel, the channel will be not active. This
also means that you can decide for the DTVDM4F to act as a single, twin , triple or quad modulator.
At the bottom of DTVIface, you will
fi
nd an indication of the relative bandwidth of a program in the global stream.
5.3 - Miscellanous
If you change satellite parameters, the previously de
fi
ned services for the modulator, will appear as question marks in
the list. (see
fi
gure below).
Please remove these services by double clicking the activation button . No services preceeded with a question mark
should be in list.
5.4 - Sorting lists
To get a better overview in the list of programs, the colums Service Name , modulation and LCN, can be sorted.
Please click on the speci
fi
c column, to have the service names sorted in alphabetical order or according to
modulation or according to LCN.
5.5 - Resetting the TRM84
In order to go back to the factory settings of the TRM84, please move your mouse over the following button :
Then right click, and left click. All your settings will be erased and the TRM84 will go back to its factory settings.
s
s
s
.
5.6 - Creating a .html report of your con
fi
guration
Pressing this button
creates a html report of the con
fi
guration of your TRM84.