Fig.2
Fig.3
B) Operation with Amplifier using USB
cable
1. Plug the antenna’s coaxial cable to the
ANT socket of the external amplifier.
2. Plug the amplifier’s coaxial cable to
the RF socket of your TV.
3. Connect the small plug of the USB
cable to the small USB socket of
external amplifier.
4. Connect the other end (large plug) of
the USB cable to your TV, computer or
USB power supply.
5. Switch on the TV and AP861 amplifier.
6. Choose TV channels required by
selection on your TV or remote
control.
7. To improve either VHF or UHF signal
reception, turn the relevant gain
tuner clockwise as shown in section A
(Fig1.b).
A click sound will be heard, which will
then cause the gain tuners to glow,
indicating power on. Continue turning
the gain tuners until; satisfactory
picture has been found.
Powering the external
amplifier using USB
connection on TV
Powering the amplifier using your computer. You can watch TV from
your computer by connecting a TV tuner to your computer.
Frequency range
VHF: 47-230MHz
UHF: 470-860MHz
Amplifier gain
VHF: 30dB
UHF: 30dB
Noise Figure
VHF: < 2.4dB
UHF: < 2.1dB
Power Supply
6V DC or USB 5V DC
SPeCIFICATIONS
© This instruction leaflet is subject to copyright and must not be reproduced,
copied or otherwise used in any way or for any purpose without the consent
in writing of the owner
Warranty
Arlec guarantees this product in accordance with the Australian
Consumer Law.
Arlec also warrants to the original first purchaser of this product (“you”)
from a retailer that this product will be free of defects in materials and
workmanship for a period of 12 months from the date of purchase;
provided the product is not used other than for the purpose, or in a
manner not within the scope of the recommendations and limitations,
specified by Arlec, is new and not damaged at the time of purchase, has
not been subjected to abuse, misuse, neglect or damage, has not been
modified or repaired without the approval of Arlec and has not been used
for commercial purposes (“Warranty”).
If you wish to claim on the Warranty, you must, at your own expense,
return the product, and provide proof of original purchase and your
name, address and telephone number, to Arlec at the address below or
the retailer from whom you originally purchased the product within 12
months from the date of purchase.
Arlec will (or authorise the retailer to) assess any claim you may make on
the Warranty in the above manner and if, in Arlec’s reasonable opinion, the
Warranty applies, Arlec will at its own option and expense (or authorise
the retailer to) replace the product with the same or similar product or
repair the product and return it to you or refund the price you paid for the
product. Arlec will bear its own expenses of doing those things, and you
must bear any other expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you may have
under a law in relation to the product to which the Warranty relates.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”)
gives the Warranty.
Arlec’s telephone number, address and email
address are:
Customer Service: (03) 9982 5111
Building 3, 31 – 41 Joseph Street,
Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065,
Blackburn North, 3130
Email: [email protected]
ANTSIG is proudly produced by ARLEC Australia Pty. Ltd.
Visit us at: www.ANTSIG.com
CPIN002687
