CONNECTING INSTRUCTIONS
LED LIGHT STATUS
TROUBLESHOOTING
CPIN006177
CPIN006177
A5 148 x 210mm
1. Receiver mode:
• Slide the switch to RX end. Press button for 9s to turn
the device on (Note: Ensure to slide switch to RX before
turning the device on).
• After the device is turned ON, the indicator status LED
light red/blue will flash alternatively waiting to be paired.
• Plug input 3.5mm cable to the AUX port into the device
and the other end to your home audio device such as
speakers, headphones etc.
• Open your phone or tablet and enable Bluetooth. Look
for device ‘AP574’ on the list and connect.
• Upon successful connection, the blue light on the device
will flash slowly (twice every 4s).
2. Transmitter mode:
• Slide the switch to TX end. Press button for 9s to turn
the device on (Note: Ensure to slide switch to TX before
turning the device on).
• After the device is turned ON, the indicator status LED
light blue will flash alternatively waiting to be paired.
• Plug input 3.5mm cable to your device such as phone,
tablet, computer etc. and the other end to the AUX port
into this device.
• Bluetooth status blue light will flash fast. Please put your
Bluetooth device close to connect.
• Upon successful connection, the blue light on the device
will flash slowly (twice every 4s).
Note: For faster connection, ensure that the Bluetooth
connecting devices (speakers, headphones) are turned on
first before
turning this device ON.
Charging:
This product has a built-in rechargeable battery.
It is recommended to fully charge the battery
before first time use.
• Insert micro-USB charging cable into the charging
port of the device. Plug another USB end to the
standard USB charging supply such as mobile
chargers, PC USB interface.
• Red light indicates charging state. Once the device is
fully charged, the red indicator light will turn off.
• The device can be operated (i.e. used as receiver/
transmitter) whilst charging.
• Low battery mode is shown by the indicator
light flashing slowly.
If connection fails or cannot connect for a long time, please turn the device off. Try to pair again. Alternatively, long press
the button for 16s to clear the pairing memory and then, try once again.
• Check the device you are trying to connect operates on its own.
• Different Bluetooth device can have different connecting protocol and varying search/pairing time.
Device Status
Red light indicates charging state. Once the device is fully
charged, the red indicator light will turn off.
OFF
All LED lights are OFF
Receiver mode
Turning ON – Press and hold
the button for 9s
Red/blue LED light alternatively flashing fast
Low Battery
Red light flashing
Waiting for a connection/
standby mode
Bluetooth status blue light flashing fast once every 1s
Successful connection
Bluetooth status blue light flashing slow twice every 4s
Transmitter mode
Turning ON – Press and hold
the button for 9s
Blue LED light fast flashing
Low Battery
Red light flashing
Waiting for a connection/
standby mode
Bluetooth status blue light flashing fast once every 1s
Successful connection
Bluetooth status blue light flashing slow twice every 4s
Compatibility
Bluetooth enabled devices
