-1-
-2-
Antra AH7-X30P Series
Auto-Darkening Welding Helmet
2017
Read and understand this entire instruction manual before attempting to assemble,install, operate
or maintain this tool. Failure to comply with the instructions may result in serious personal injury
and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed when
using this tool:
Indicates an imminently hazardous situation that, if not avoided, WILL result
in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, COULD result
in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, MAY result in
minor or moderate injury.
Indicates important information, which if not followed, MAY cause damage to
equipment.
IMPORTANT SAFETY INSTRUCTIONS
FUMES AND GASES can be hazardous !
Welding produces fumes and gases that are hazardous to your health.
• Keep your head out of the fumes. Do not breathe the fumes.
• If inside, ventilate the area and/or use exhaust at the arc to remove welding
fumes and gases.
• If ventilation is poor, use an approved air-supplied respirator.
• Read the manufacturer’s instructions for metals, consumables, coatings, cleaners, and degreasers.
• Do not weld in locations near degreasing cleaning, or spraying operations. The heat and rays of the
arc can react with vapors to form highly toxic and irritating gases.
• Do not weld on coated metals, such as galvanized, lead, or cadmium plated steel, unless the
coating is removed from the weld area, the area is well ventilated, and if necessary, while wearing
an air-supplied respirator.The coatings and any metals containing these elements can give off toxic
fumes if welded.
• Work in a confined space only if it is well ventilated, or while wearing an air-supplied respirator.
Always have a trained watchperson nearby. Welding fumes and gases can displace air and lower
the oxygen level causing injury or death. Be sure the breathing air is safe.
California Proposition 65 Warnings !
• Welding or cutting equipment produces fumes or gases which contain chemicals known to
the
State of California to cause birth defects and, in some cases, cancer. (California Health & Safety
Code Section 25249.5 et seq.)
• This product contains chemicals, including lead, known to the State of California to cause
cancer,
birth defects, and reproductive harm. Wash hands after handling.
ARC RAYS can burn eyes !
Never look at arc welding without proper eye protection. Arc rays from the
welding process produce intense visible and invisible (ultraviolet and infrared)
rays that can burn eyes and
Skin, Hot sparks fly off from the weld and can
burn eyes and skin.
Wear a welding helmet fitted with a proper shade of filter to protect your
face and eyes when welding or watching.
• Wear approved safety glasses with side shields under your helmet.
• Use protective screens or barriers to protect others from flash and glare, warn others in the area
not to watch the arc.
• Wear protective clothing made from durable, flame resistant materials, leather welding gloves
and full foot protection.
WELDING can cause fire or explosion
!
Welding on closed containers, such as tanks, drums, or pipes, can cause
them to explode.Sparks can fly off from the welding arc. The flying sparks,
hot work piece, and hot equipment can cause fires and burns, Accidental
contact of electrode to metal objects can cause sparks, explosion,
overheating,or fire. Check and be sure the area is sale before doing any
welding.
• Be alert that welding sparks and hot materials from welding can easily go through small cracks
and openings to adjacent areas.
• Do not weld on closed containers such as tanks, drums, or pipes; unless they are properly
prepared according to AWS F4.1 standards.
• Connect work cable to the work as close to the welding area as practical to prevent welding
current from traveling
long, possibly unknown paths and causing electric shock and fire
hazards.
• Never use arc welder to thaw frozen pipes.
• Remove electrode from holder when not in use.
• Wear oil-free protective garments such as leather gloves, heavy shirt, cuff-less trousers, high
shoes, and a cap.
• Remove any combustibles, such as butane lighters or matches, from your person before doing
any welding.
• Always keep a fire extinguisher readily available and watch for fire.
• Protect yourself and others from flying sparks and hot metal.
• Do not weld where flying sparks can strike flammable material.
• Remove all flammable materials from the welding area. If this is not possible, tightly cover them
with approved covers
• Be aware that welding on a ceiling ,floor, bulkhead, or partition can cause fire on the hidden side.
