XP-10
ANTIGRAVITY BATTERIES
//
310 527 2330
//
Page 3 of 8
USER MANUAL
Product Use
CHECKING THE AVAILABLE CAPACITY
To check the state of charge/capacity on the XP-10 press the Power Switch. The XP-10 has a lighted capacity indicator
which will show the state of charge.
Each light lit is equal to 20% capacity.
1 L
IGHT
= 20%
2
LIGHTS
= 40%
3
LIGHTS
= 60%
4
LIGHTS
= 80%
5
LIGHTS
= 100%
LED FLASHLIGHT OPERATION
Press and hold the Power Button for 3 seconds to turn on the Flashlight.
The Flashlight has 3 light patterns (Normal, SOS and Strobe).
You can cycle to the next LED pattern by pressing the Power Switch again.
After the last Flashlight pattern the unit will turn off the Flashlight.
DO NOT STARE INTO THE LED FLASHLIGHT, PERSONAL INJURY MAY RESULT.
CHARGING THE XP-10
The XP-10 comes with 2 chargers for charging at Home/Indoors or in your Vehicle: an AC Wall Outlet Charger, and a
DC Cigarette Lighter Charger.
When charging, the indicator lights will flash one by one. The number of solid lights lit indicates the XP-10 charge level.
All lights solidly lit indicates a fully charged XP-10.
To charge, plug either charger into the XP-10’s Input port to begin charging.
When fully charged remove charger. Do not leave charging over 24 Hours.
NEVER LEAVE ANY ELECTRONIC DEVICES UNATTENDED DURING CHARGING.
POwER BUTTON
1)
2)
1)
2)
3)
4)
1)
2)
