4
5
4. Operation Controls and Functions
4.1 Transmitter Panel
Name
Function description
1
Power LED
Red LED indicates when the transmitter is powered.
2
SERVICE port
Firmware update port.
3
DC 24V
DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, this
means that either the transmitter or receiver can be
powered by the 24V/1A power adapter.
4
HDBT OUT
RJ45 connector for connecting to the HDBT IN port
on the receiver with CAT 5e/6 cable.
5
Connection Signal
Indicator lamp
(on the left side of the
HDBT OUT port)
▪ Illuminate: Transmitter and Receiver have a good
connection.
▪ Flashing: Transmitter and Receiver have a poor
connection.
▪ Dark: Transmitter and Receiver are not connected.
6
Data Signal Indicator
lamp (on the right
side of
the HDBT OUT port)
▪ Illuminate: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7
HDMI OUT
HDMI loop output for display.
8
HDMI IN
HDMI source input.
9
IR IN
IR port input for receiving the IR signal.
10 IR OUT
IR port output for control of source device. This IR
output signal is from IR IN port of receiver.
11
RS-232
3-pin pluggable connector for RS-232 command
transmission. The RS-232 command will pass-
through from transmitter to receiver or receiver to
transmitter.
4.2 Receiver Panel
Name
Function description
1
Power LED
Red LED indicates when the transmitter is powered.
2
SERVICE port
Firmware update port.
3
DC 24V
DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, this
means that either the transmitter or receiver can be
powered by the 24V/1A power adapter.
4
HDBT OUT
RJ45 connector for connecting to the HDBT OUT
port of transmitter with CAT 5e/6 cable.
5
Connection Signal
Indicator lamp
(on the left side of the
HDBT OUT port)
▪ Illuminate: Transmitter and Receiver have a good
connection.
▪ Flashing: Transmitter and Receiver have a poor
connection.
▪ Dark: Transmitter and Receiver are not connected.
6
Data Signal Indicator
lamp (on the right
side of
the HDBT OUT port)
▪ Illuminate: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7
HDMI OUT
HDMI output for display.
8
AUDIO OUT
3.5mm stereo connector for analog audio output.
9
IR IN
IR port input for receiving the IR signal from the
remote control.
10
IR OUT
IR port output for control of display device. This IR
output signal is from IR IN port of transmitter.
11
RS-232
3-pin pluggable connector for RS-232 command
transmission. The RS-232 command will pass-
through from transmitter to receiver or receiver to
transmitter.
1
2
3
4
7
8
9
10
11
1
2
3
4
7
8
9
10
11
5
6
5
6
