4K Compact Matrix
1)
To switch an input to an output:
Example: input 1 to output 3
→ Press INPUTS 1 + OUTPUTS 3
The above procedure is can be carried out on the matrix front panel or via the
remote control unit.
Default status, on initial boot up the matrix assigns the IR outputs to the corre-
sponding HDMI input, meaning, IR out 1 is directly associated to HDMI input
1 and so on. When you switch an HDMI input to a different output, the corre-
sponding IR OUT will be switched synchronously to allow the IR commands to
be sent from the selected output zone back through the matrix to the source.
2)
To switch an input to several outputs:
Example: switch input 2 to output 3 and 4
→ Press INPUTS 2 + OUTPUTS 3 + OUTPUTS 4
3)
To switch an input to all outputs:
Example: Input 1 to all Outputs
→ Press INPUTS 1 + ALL + ENTER
4.1.2 Control TV set at matrix location
Connecting an IR receiver sensor to the IR IN port on the matrix enables users
to control TV sets (or other devices) from the matrix location.
The IR TX with then be connected to the IR OUT port on the HDBase-T
receiver and located in the correct position on the device.
See the figure below:
10
Control TV set or other device from matrix location.