Anthos SMART TOUCH R7, Руководство по эксплуатации

Страница: 16 / 90

16 16 EN
R7
- OPERATING INSTRUCTION
4.2. Emergency devices
WARNING!
Use the devices below when movement of the equipment
needs to be blocked:
• Dental chair control buttons (a), (c) or (d).
Pressing any dental chair button blocks all movements are
blocked.
• Foot control (
b
)
Foot control actuation: all movements are blocked.
4.3. Adjustable headrest
The headrest may be of two types:
1
with manual cushion lock lever
2
with pneumatic cushion lock lever
Adjusting headrest height.
• with manual locking ( 1 ):
The head rest blade is positioned through a magnetic clutch. The operator
should pull up and/or push down the headrest until it is in the desired
position.
• with pneumatic locking ( 2 ):
Press and hold down the locking button ( u ) to position the headrest as
desired. Once you have reached the desired position, release the button
(
u
) to lock the headrest in place.
Adjusting the cushion:
• with manual lock ( 1 ): rotate the lock knob ( k ) anti-clockwise, position
the cushion as desired and then retighten the lock knob.
• with pneumatic lock ( 2 ): press the lock button ( u ) and keep it pressed
as you adjust the cushion as desired. Once the cushion is oriented as
desired just release the button ( u ) to lock in place.
Proper positioning of the headrest.
WARNING!
For correct use of the headrest, position the patient's head as shown in the
figure.
Important information.
WARNING!
• Maximum on-headrest load: 30 Kg.
• Do not attempt to move cushion while patient is resting against it.
• Do not attempt to modify the position of the cushion without first
releasing the lock mechanism.
• The pneumatic locking device is active only when the air circuit is
pressurized and the dental unit is on.