manualshive.com logo in svg

Anthem Statement D1, Руководство по эксплуатации, Страница: 63 / 86

Поделиться
Скачать
Anthem Statement D1 Скачать руководство пользователя страница 63

56

7. 

SETUP MENU

continued …

7.4.6 ADJUST INPUT LEVELS

For Sources set to Anlg-DSP or Anlg-Dir in menu 5, you can match input levels in MAIN to each other so
there are no large changes in volume as you change Sources. 

If a source that is set to Analog-DSP is playing while you adjust the Input Level, you will notice a vertical bar
graph to the left of the dB setting. With the On-Screen display, this Bar Graph changes from green to pink,
to warn that there is 6 dB of headroom left. With pop music material, an occasional transition into the pink
region does not necessarily mean that the input is overloaded. If the bar graph stays pink constantly, reduce
the level until the bar graph becomes green for the most part.

Before making changes or adjustments in this menu, have all connected source components playing
similar music material. Then, as you switch through each highlighted Source, you will hear that
component play. This lets you know that each component is connected to the Statement D1, and it also
allows for easy comparative level adjustments of analog sources. Remember, adjusting input levels only
functions with Sources set to Analog in menu 5, and the bar graph only works with Analog-DSP setting.

Example:

Adjust TAPE Input Level.

• Make sure a source component is connected to TAPE Analog L/R Input and playing.

• Enter the Setup (section 7.1). Go to ‘6. ADJUST INPUT LEVELS’ and press 

SELECT

.

• Press the 

button until you reach ‘d. TAPE: +0.0 dB’.

• Press 

SELECT

. ‘+0.0 dB’ will be highlighted in red.

• Use the 

buttons to change the Level.

• When finished, press 

BACK

and then  

to go to another Source, or...

• Press 

BACK

to leave the submenu and return to the main menu.

6.  ADJUST INPUT LEVELS

Adjustment only applies when
Audio-In is set to Analog

a.

CD :

+0.0 dB

b.

2-Ch :

+0.0 dB

c.

6-Ch :

+0.0 dB

d.

TAPE :

+0.0 dB

e.

FM/AM :

–5.0 dB

f.

DVD :

+0.0 dB

g.

TV :

+0.0 dB

h.

SAT :

+0.0 dB

i.

VCR :

+0.0 dB

j.

AUX :

+0.0 dB

Содержание Statement D1























































































Отзывы:

Нет отзывов