manualshive.com logo in svg

Anthem MRX520, Руководство по эксплуатации

Поделиться
Скачать
Anthem MRX520 Скачать руководство пользователя страница 15

9

SPEAKER CONNECTIONS  

Using speaker wire, connect the positive (+) connection on the speaker to the positive 

(+) binding post on the appropriate amplifier output, and the negative (–) connection 

on the speaker to the negative (–) binding post on the same amplifier channel using 

cable that is insulated to handle the maximum output of the amplifier. Carefully 

remove insulation using a wire stripper.

Do not connect more than one speaker to each amplifier output. Be sure that power 

is turned off when connecting or disconnecting anything, and that the speakers are 

rated for use with this receiver.

US models allow banana connectors. If using them, first turn the binding post until it is 

closed to allow the plug to be fully inserted.

If using speaker cables with banana connectors, first turn the binding post until it is 

closed.  This way, the plug can be fully inserted.

Содержание MRX520




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды