C1 -
ClearStream 1
Antenna Assembly
1.
The ClearStream 1 antenna comes with:
• 1 reflector
• 1 tapered loop element
• 75 ohm transformer (internal)
• 1 threaded bolt
• 1 adjustable mast clamp
2.
Feed the supplied bolt through hole in U
clamp assembly.
2.
4.
Assembly complete.
Attach the C1
antenna to any kind of mast or mount
(up to 2” in diameter) with the adjustable U
bolt clamp. The 75 ohm coax connector is
in the center rear.
3.
3.
Align the two halves of the separating column and attach
the reflector (grid) to the antenna element (Tapered loop) by
threading the bolt through the center of the column. Tighten.
1.
4.
