XP Iris 2
– User Manual
Page 15 of 29
6. Press
“Add”
button to add .
APK
application you need to install to the list within
Iris
Connect 2TM
. Navigate to the folder where application is stored and double click on
the .
APK file
;
7. At the top part of the screen you will see the name of the application you are about
to install;
8. Turn the uploading rack
ON
;
9. Insert device into charging slot on the uploading rack (every time you insert the
device it will show up in the device list section of
Iris Connect 2
TM
.
10. Repeat Step 9 for every device you need to update;
11. Select all the devices in
Iris Connect 2
TM
in section where devices are listed (Note:
software will only update the devices you have selected)
12. Press
“Update”
button located at the bottom right corner of the
Iris Connect 2
TM
software;
13. All the devices will be updated automatically. Once done, you would only see
Iris
Connect 2
TM
and no other pop-up windows.
14. Remove device(s) and make sure the application has been installed.
15. Lock the device (see
“Locking XP
Iris 2
TM
Device”
procedure on page 16)
16. Device is now ready for CS use.
NOTE: You can install multiple apps at the same time. Keep in mind that all
aftermarket apps on XP
Iris 2
TM
devices are going to be deleted from the device
first.
Removing Content from Devices:
Deleting content from XP
Iris 2 device(s) using
Iris Connect 2
is very simple.
1.
Launch
Iris Connect 2
2.
Select device(s);
3.
Without adding any applications, press update button and confirm that you want
to delete all the apps on XP
Iris 2;
4.
All applications on selected devices are going to be uninstalled.
