If the user triggers again, the recording will stop in Bank 3, check
for an empty (blue) bank, founds none and stop recording. The
user will browse Bank 3, bank setup as following:
Bank 1 is stored (green)
Bank 2 is stored (green)
Bank 3 is browsing (yellow)
Bank 4 is invalid (gray)
Of course triggering when there is no recording (red) bank has
no effect.
To record again, the user can either delete independent bank
with “clear bank/all” + bank number, or all banks at once with
with “clear bank/all” + “all” as explained before.
“clear bank/all” + “all” will bring the following bank state:
Bank 1 is recording (red)
Bank 2 is
empty
(blue)
Bank 3 is
empty
(blue)
Bank 4 is invalid (gray)
