Antelope Isochrone OCX-V, Руководство пользователя

Страница: 6 / 11

PAL PAL Black Burst
PAL CB PAL Color Bars
NTSC NTSC Black Burst
NTSC CB NTSC Color Bars
NTSC BW NTSC Black and White mode (30 fps, color burst off)
9
10
Word Clock Termination Status LEDs
When lit, the corresponding Word Clock output is in use, and is properly
Terminated at 75 ohms. Blinking means the corresponding output is over-terminated.
Dark means the corresponding output is unused or is not terminated.
Video Generator knob
This knob selects the video signal provided by the four video outputs on the back of the
OCX-V. The first five choices provide different video standards.
The final option, DA (distribution amplifier), distributes an incoming video signal to the
four video outputs. The DA setting will only work if the SOURCE knob is set to VIDEO.
Like the output audio clock generator, the video generator is always phased-locked with
the input reference. For this locking to work the input reference has to be one of at a
valid rate. The red LED above the knob indicated the status of the video generator. If the
LED is flashing, the video generator is not able to lock to the incoming reference. This
situation can occur if the unit is locking to one of the audio references while in the DA
mode (SAMPLE RATE knob is set to DA) and the audio reference is not at a valid rate.
(Valid rates are listed in Appendix A).