Antelope DISCRETE 8 PRO, Руководство пользователя

Страница: 51 / 87

Discrete 8 Pro Synergy Core User Manual
Page 52
EMU MIC - This row represents mic preamp inputs 1 - 8 with mic emulations
applied to incoming microphone audio. This offers some interesting possibilities,
such as:
●
Simultaneous monitoring and recording of dry microphone audio from the
‘PREAMP’ row and mic emulation audio from the ‘EMU MIC’ row on separate
audio tracks in your DAW – with and without Synergy Core FX added on top.
●
Setting up multiple monitoring mixes, e.g. ‘dry’ mix for the recording engineer
and ‘mic emulation’ mix for the performing artist, with different FX chains on all
mix channels.
COMP PLAY - This row represents DAW 'Outputs 1 - 32' (Thunderbolt™) or DAW
'Outputs 1 - 24' (USB). This is where you receive audio from your DAW. Create a
new track in your DAW and assign the output with matching number - e.g. DAW
'Output 1' = 'COMP PLAY' 1. This row also represents all computer audio, such as
OS media playback (iTunes, Spotify, YouTube, Zoom, etc.), DAW outputs, etc.
ADAT IN - This row represents up to 16 ADAT optical audio inputs, found on 2
ports of 8 channels each. Note that ADAT runs on S/MUX.
S/PDIF IN - This row represents 2 channels of incoming stereo S/PDIF audio
over coaxial RCA cable.
AFX OUT - The AFX OUT row (‘AFX’ short for 'Antelope FX') represents the
output from 16 mono audio channels with Synergy Core FX applied.
MIXER 1-4 OUT - These rows represent the four 2-channel stereo outputs from
the four virtual 32 channel mixers in the ‘Mixer’ tab. Channel 1 is left and Channel
2 is right.
TO
:
LINE OUT
- This row represents 8 line outputs over one D-Sub 25-pin connector
(TASCAM Standard Pin Layout). The D-Sub connector provides 8 mono audio channels.
HP1
- This row represents Headphone output 1 as two mono (L/R) channels.
HP2
- This row represents Headphone output 2 as two mono (L/R) channels.
MONITOR 1
- This row represents Monitor output as two mono (L/R) channels.
MONITOR 2
- This row represents the second Monitor/Reamp output as two mono
(L/R) channels. Note: This row works only when the output is set to MONITOR mode
that can be switched from the MONITOR 2 section in the main control panel.
REAMP
- This row represents the two mono REAMP outputs, used for sending DI audio
tracks for re-amping through guitar amplifiers and other suitable equipment. Note: This