Parts list:
Installation:
This power supply is backwards-compatible to previous ATX specifications. To make sure you
connect your power supply properly, please refer to the user manual supplied with your
motherboard and peripherals before connecting the Neo HE to any of your devices.
1. Disconnect the power cord from your old power supply.
2. Open your computer case. Follow the directions provided in your case manual.
3. Disconnect all power connectors from the motherboard and from the peripheral devices
such as case fans, hard drives, optical drives, floppy drives, etc.
4. Remove the existing power supply from your computer case
and replace it with your new Neo HE power supply.
5. Connect the 24-pin main power connector. If your
motherboard uses a 20-pin connector, detach the 4-pin
attachment on the 24-pin power connector
(see pictures 2 and 3).
Note: the detachable 4-pin section
cannot be used in place of the 4-pin +12V connector.
6. For Neo HE 380 and Neo HE 430: Connect the 4-pin +12V
connector.
For NeoHE 500 and Neo HE 550: If you are using a single
CPU system, separate the 4+4-pin +12V connector and plug
the 4-pin section labeled with "Use this Connector for
Single CPU" to the motherboard (pic 4). If you are using a
dual CPU system or a system that require a 8-pin +12V
connector, snap the 4-and-4-pin connector together before
plugging into motherboard (pic 5).
7. In the package, you will find power-supply-to-peripheral Molex connectors. Connect the
6-pin to any of the 6 pin sockets on the power supply and connect the peripheral Molex
connectors to your peripheral devices. Repeat as necessary.
8. In the package, you'll find power supply-to-SATA connectors. Connect the 6-pin connector
to any of the 6-pin sockets on the power supply and connect a SATA connector to your
SATA drives. Repeat as necessary.
9. In the package, you'll find 1 for NeoHE 380and 430, 2 for NeoHE 500 and 550 PCI
Express graphic card connector. It's the only 6-pin connector with 3 yellow wires and 3
black ones. Connect the 6-pin PCI Express connector marked "PCI-E" to your PC I
Express graphics card if needed.
Note: Please consult the user manual supplied with
4
Picture 2
Picture 3
Picture 4
Picture 5
# Quantity
Part Name
Description
1-3
1
Neo HE power supply
includes 24-pin main connector, 4 pin
+12V connector for HE 380 & 430 or
4+4 pin +12V connector for HE 500 & 550
4
2
77 cm Molex connector w/cable
includes three Molex connectors
5
1
14 cm Molex to Floppy connectors w/cable
includes one Molex and two floppy
connectors
6
1
60 cm PC I Express connector w/cable
(Neo HE380 andNeo HE430 only)
Includes one PC I Express connector
2
60 cm PC I Express connector w/cable
(Neo HE500 and Neo HE550 only)
Include one PC I Express connectors
7
2
73 cm Serial ATA connector w/cable
includes two Serial ATA connectors
