Antec HCP-750, Руководство пользователя

Страница: 4 / 9

I
NTELLIGENT
H
YBRID
C
ABLE
M
ANAGEMENT
The HCP-750 uses Intelligent Hybrid Cable Management. Cables that are important or mandatory are permanently
connected to the PSU for the highest quality power delivery. There are modular jacks on the back of the PSU to
add additional cables as needed. Using only the cables you need will reduce clutter and improve airflow inside your
case. For the list of connected and optional cables, see Table 3.
M
ODULAR
C
ABLE
J
ACKS
There are three 5-pin black jacks and five 10-pin red jacks on the back of your HCP-750 PSU. These jacks are for the
optional cables that come with your power supply. A modular 10-pin connector system allows you plug 5-pin
connectors into the 10-pin jacks if you run out of 5-pin jacks.
+12 V
OLT
R
AIL
D
ISTRIBUTION
The HCP-750 uses four se12 volt power rails. Different connectors are hooked up to separate circuits to aid
in the balanced distribution of power between devices in your computer. The +12V rails have been assigned to
different connectors, as shown in Table 2, to prevent voltage sags in one device due to sudden demands for power
by another device.
T
ABLE
2
Direct Cabling +12V Rail
24(20 + 4)-pin Motherboard 1
8(4 + 4)-pin ATX12V/EPS12V 2
8(6 + 2)-pin PCI-E 3