ANTARION TVLT22B2, Руководство по эксплуатации, Страница: 41 / 72

English - 17 -
• The batteries maybe inserted incorrectly. Refer to the
section “Inserting the Batteries into the Remote”.
No signal on an input source
• It is possible that no device is connected.
• Check the AV cables and connections from your device.
• Check the device is switched on.
The Image is not centered in VGA source
To have your TV automatically center the image, enter
the PC Position menu in Picture menu, highlight
Autoposition and press OK . Wait for it to finish. In order
to set the position of the image manually you can use
H Position and V Position options. Select the desired
option and use Left and Right directional buttons on the
remote to set.
Recording unavailable
To record a programme, you should first correctly connect
a USB storage device to your TV, while the TV is switched
off. You should then switch on the TV to enable recording
feature. If you cannot record, check the storage device is
correctly formatted and there is sufficient space.
USB is too slow
If a “USB disk writing speed too slow to record” message
is displayed on the screen while starting a recording, try
restarting the recording. If you still get the same error,
it is possible that your USB storage device does not
meet the speed requirements. Try using a different USB
storage device.
PC Input Typical Display Modes
The following table is an illustration of some of the
typical video display modes. Your TV may not support
all resolutions.
Index Resolution Frequency
1 640x480 60 Hz
2 800x600 56 Hz
3 800x600 60 Hz
4 1024x768 60 Hz
5 1024x768 66 Hz
6 1280x768 60 Hz
7 1280x960 60 Hz
8
1280x1024 60 Hz
9 1360x768 60 Hz
10 1400x1050 60 Hz
11 1600x1200 60 Hz
12 1920x1080 60 Hz
AV and HDMI Signal Compatibility
Source Supported Signals Available
EXT
(SCART)
PAL 50/60 O
NTSC 60 O
RGB 50 O
RGB 60 O
Side AV
PAL 50/60 O
NTSC 60 O
PC/YPbPr
480I, 480P 60Hz O
576I, 576P 50Hz O
720P 50Hz,60Hz O
1080I 50Hz,60Hz O
1080P 50Hz,60Hz O
HDMI
480I 60Hz O
480P 60Hz O
576I, 576P 50Hz O
720P 50Hz,60Hz O
1080I 50Hz,60Hz O
1080P
24Hz, 25Hz
30Hz, 50Hz,
60Hz
O
(X: Not Available, O: Available)
In some cases a signal on the TV may not be displayed
properly. The problem may be an inconsistency with
standards from the source equipment (DVD, Set-top
box, etc. ). If you do experience such a problem please
contact your dealer and also the manufacturer of the
source equipment.