©2021 Antari Lighting and Effects
5
www.Antari.com
ELECTRONIC MENU –
The illustration below detail the varios menu commands and adjsutable settings.
This is the predetermined amount of time in between haze output blast when the
electronic timer is activated. The interval can be adjusted from 1 to 360 seconds.
This is the amount of time the unit will haze when the electronic timer function is
activated. The duration can be adjusted from 1 to 200 seconds
This function sets the units DMX for operating in DMX mode. The address can
adjusted from 1 to 511
This function will activate or deactivate the quick-start feature. The quick start
features remebers the last timer and manual setting used and automatically enters
those setting when the unit is powered on.
ELECTRONIC TIMER OPERATION –
To operate the unit with the built-in electronic timer, simple tap and release the “Timer” button after the
unit has powered on. Use the “Interval,” and “Duration,” commands to adjust to the desired timer
output settings.
DMX OPERATION -
This unit is DMX-512 compatible and can work with and other DMX compliant device. The unit will
automatically sense DMX when an active DMX signal is plugged into the unit.
To run the unit in DMX mode;
1)
Insert a 5-pin DMX cable to a DMX Input Jack on the rear of the unit.
2)
Next, select the desired DMX address by selecting the “DMX-512” function in the menu
and using the up and down arrow buttons to make your address selection. Once the
desired DMX address is set and a DMX signal is received, the unit will react to the DMX
commands sent from a DMX controller.
Interval
Set 180s
Duration
Set 120s
DMX512
Add. 511
Run Last
Setting
