3
If you experience low output, mechanical noise or no output at all, unplug immediately.
Check fluid level, the external fuse, remote connection, and power from the wall. If all of
the above appears to be O.K., plug the unit in again. If snow does not come out after
holding the remote button down for 30 seconds, check the hose attached to the tank to
make sure there is fluid going through the hose. If you are unable to determine the
cause of the problem, do not simply continue pushing the remote button, as this may
damage the unit. Return the machine to your ANTARI dealer.
Maintenance
Do not allow the snow or foam liquid to become contaminated. Always replace the caps
on the liquid container and the snow machine liquid tank immediately after filling.
Before storing, flush out system with clean water.
Snow Liquid
Depending on the desired effect, use either ANTARI SL-5 Snow/Foam Liquid for normal
snow or ANTARI SL-5A Snow Liquid for fast-dissipating snow.
Save these instructions
