5
© 2021 Antari Lighting and Effects Ltd.
www.antari.com
Step 5:
Fill the fluid tank with Antari approved fluid.
Step 6:
Press “
HEATER
” menu, then press “
START
” to start heating. Machine will take
approximately 8 mins to heat up.
Always connect the machine to a protected circuit and ensure it is properly grounded to
avoid risk of electrocution.
Step 7:
To start making haze press “
MANUAL
” menu, then press “
START
” .
Press “
STOP
” to stop haze. Press “
SETTING
” menu to adjust haze and fan output level.
Step 8:
To turn off machine press “
POWER OFF
” menu, and follow direction shown on display.
Shut off gas cylinder, at the same time machine will start release the pressure. Make sure pressure
is completely released by checking the regulator. Disconnect power and gas connection to finish
shutting down process.
Operation
Control Panel Operation
The machine can be operated with the TFT LCD control panel located on the rear.
