Antares 96550, Инструкция по установке и эксплуатации

Страница: 2 / 13

Page 2 UPC Universal Power Charger User Manual, Part No 96550-96580, 12th October 2007
COMPLIANCE INFORMATION
CE mark:
Conditions of use for which CE mark applies
This equipment is intended to be used solely for professional purposes in commercial and light
industrial locations, powered from the low-voltage public mains supply.
Non approved conditions of use
This unit may be suitable for use in other applications, but it can only be supplied as a component in
this respect, for which the CE mark displayed on this manual does not apply. If the unit is used in this
way, as a component part to build a battery charging or similar apparatus, then this unit is supplied
solely on the condition that it is the responsibility of the manufacturer of the charging apparatus to
ensure that the apparatus complies with the requirements of the relevant legislation, and apply the
CE marking should it be required. In this case, this user manual does not apply, and reference
should be made to Antares (Europe) Limited for any information required for compliance with the
legislation.
Type approval:
This product is type approved for automotive applications.
UNPACKING
Pack contents:
1 Antares Universal Power Charger
1 Instructions for Installation & Use*
*with multiple shipments this manual may be shipped separately, further copies can be
obtained from Antares (Europe) Limited or downloaded from our support website (registration
required for access):
http://www.antares.co.uk/technical/index.htm
APPLICATION
The Power Charger is suitable for use under shelter only. It must not be exposed to rain. It is suitable
for a wide range of applications on vehicles or in fixed locations, subject to the conditions of use
stated above under CE marking & type approval. It may be used as a stand alone high performance
DC power supply (specify on order), or as a fully automatic multistage charger when connected to a
battery. The charging characteristics of the standard model are optimised for flooded and retained
electrolyte lead acid batteries. Other charging regimes are available & may be customised for
specific applications.
Please ensure that operation is confined to within the limits contained in the product specification
given at the end of this manual.
Suitable Battery Types:
The power charger is suitable for charging the following types of battery:
12 VOLT MODELS:
Flooded and retained electrolyte lead acid batteries of 12 volt rating, being made up from 6 identical
cells connected in a series configuration.