Antarctic Star JC-90VEL-F, Руководство пользователя

Страница: 7 / 16

INSTALLATION
USING YOUR BEVERAGE CENTER
Startup
Connect the power cord to a standard wall outlet. Do not use a GFCI outlet to connect the unit
(see page 4). After connection, you will immediately hear a short beep.
Temperature - Adjustable Thermostat Control
The default temperature is 4守F. Use the
0
and
0
buttons to set the desired temperature
between the range of 32 ° F - 61 ° F.
The display will flash while the temperature is being set. After a few seconds, it will revert to its
current internal temperature reading The digital display reading will adjust as the unit cools.
While the unit is adjusting to the new setting, press the +
0
or
0
- buttons to view the selected
temperature setting.
If there is a power outage, the unit will revert to the last temperature setting once power is restored.
Loading Beverages
When first loading the beverage center to full capacity, we recommend the following steps
to effectively cool a large number of beverages.
1. Use the Adjustable Thermostat Control to set the temperature to 43 ° F (also the default
temperature).
2. Allow the beverage center to cool for a minimum of two hours.
3. Load the beverages. To achieve maximum capacity, refer to the loading diagrams.
4. After initially filling with beverages, the internal temperature will rise as indicated on the display.
5. Once the beverage center has cooled the beverages to 4守F, use the Adjustable
Thermostat Control to select a desired cooler internal temperature (lowest temperature setting is 40
°
F).
6. Allow several hours for the beverage center to cool to the desired lower temperature.
Note: It is normal for temperature variances to occur inside the unit, and areas near the door will
have slightly warmer temperatures.
6