Antarctic Star JC-75, Руководство пользователя

Страница: 8 / 12

8
water, rinse and dry.
Magnetic Door Seals: Wash with warm sudsy water.
HOW TO INSTALL

Install the unit in a convenient location away from extreme heat and cold.
This
Wine cooler
should be far away from the heating source, and is prevented from direct sunlight. Allow
sufficient clearance between the unit and sidewall so the door will open without obstruction. This
unit is designed for free-standing installation only, not for recessed installation.

Select a space with strong level floor. Not recommended for carpeting or other soft / uneven
surfaces.

Allow 5 inches of space between the unit’s side,rear and
the wall. In addition, sufficient clearance (160°) should be
maintained to allow the door to open properly and
completely.

The appliance must be correctly connected to the power
supply, 115V/60Hz, certainly grounded.

Do not use an extension cord.

Wine cooler should be placed without packages in horizon.
It is not allowed to slant over 45°during the transportation.
CARE AND MAINTENANCE
The unit should be cleaned on a regular basis. (See: “HOW TO CLEAN”)
It is necessary to have an adequate ventilation space around the unit in order to attain
proper performance, dissipation of heat, maintain efficiency, and low power consumption.
Clearance of minimum 5 inches should be maintained at the rear and sides of the unit and 8
inches at the top of the unit.
Do not modify the power cord under any circumstance to allow the unit to be plugged into a
non-grounded outlet. To avoid heat damage to the power cord, please ensure that it does not
come in proximity or in direct contact with the compressor of the unit.
Please avoid installing the unit in a location where the appliance will come in contact with
water or moisture to minimize rusting of metal parts.
The unit should not be installed near any heat source or in a location where it will come in
direct contact with the sunlight.
The components, if need to be replaced, should be replaced with like components, and
should be replaced by the manufacturer or its service agent or a similarly qualified person in
The unit is not designed to be installed in an outside area such as a garage or a
porch. Ambient temperatures of below 50°F or above 90°F will hinder the
performance of the appliance.