2
1. Function Description
Its power system uses a wide-voltage dual-frequency motor in Grade IP55
protection (insulation grade: F) as its driver, to provide swirl-type circular suction
with lower noise, higher pressure and larger flow.
Built-in filter can effectively remove colloid inhalation and other solid particles.
Large-capacity water tank and efficient gas separation systems, liquid pipeline can
be effectively separated.
Configured with multiple layers of protection overload, and pressure relief safety
devices, so that the device longer life.
This device should be used with a dental curing device to remove droplets,
spit and food residue in the patient’s mouth.
2. Safety Measures
2.1 Important safety signs
This section provides the explanations on “warning” and “attention”. These
warnings, safety precautions and important safety instructions described later
don’t cover all possible conditions.
Meanings of marks and signs for this device:
Caution!
Unsafe operation may lead to personal injury and property loss!
Warning!
The internal live components must not be operated before the
power is cut off!
Caution!
The device surface may have a high temperature. Never touch
it with your bare hands!
Meanings of marks and signs for this device:
Warning: Dangerous or unsafe operation that may lead to serious personal
injury or death;
Attention: Dangerous or unsafe operation that may lead to slight personal
injury or property loss.
Do don’t attempt!
No disassembly by yourself!
Keep grounding to prevent electric shock!
Please unplug the power plug!
Please follow the instructions!
2.2 For installation
Warning: He suction system is for indoor use only, so please don’t install it
near a heater or flammable materials, or in a damp, oily or lace with
leakage of inflammable gas.
If not, an electric shock or fire may be caused.
Warning: Please don’t install this device in a small, closed place, or a place
where no room temperature could be adjusted.
If not, its service life may be reduced or the device may suffer from
failures.
Attention: The suction system must be installed on a flat, solid surface that
can bear its weight for use.
If not, abnormal vibration, noise or product failures may occur.
Attention: Check if there is a jam at the water inlet or air outlet.
If not, the working efficiency of the suction machine may be reduced
or some failures may occur.
