2. Power Unit
The power unit refers to the
system indicated in the figure
below.
We herewith give some
indications on the components
included in the Power Unit to
be supplied by the customers.
Power Units shall
serve the winch with a
pressure of 100-120 bar,
depending on the model
(check the table at p.3)
have a flow of 7,5 - 30 L /
min
connect to the winch with
3/8” inches pipes.
Power Unit
Switches - Mod. 251.035
Two switches are needed to activate the two speeds of each winch;
these are conventionally the red one for the first and the grey one for
the second speed.
Although the microswitch is protected by a watertight diaphragm,
the stainless steel ring nut is provided with a seat for sealant; more
sealant must also be put in the hole through which the electric wire
passes.
Power Unit is not supplied
by Antal.
23
SEALANT
SEALANT
Ø 65
Ø 80
SWITCHES
POWER UNIT
Hydro
Pump
Electric
Motor Electro
Valves
Battery
Control
Box
XT66HD, XT70HD
Installation and Maintenance
4
