Dual Channel Gigabit Ethernet PCIe Card
4
device. Please note that the power input DC jack is located at the
secondary side (type-A connector):
WARNING! Don’t supply the power from your PC USB host with
an USB-to-DC-Jack conversion cable to the DC jack of the Isolation
Adapter, it will short the primary and secondary side isolations. If you
are using an AC Adapter to provide power, please make sure that
your AC adapter provides enough isolation capability, at least it
should be more than 2,500Vrms.
1.
Use static electricity discharge precautions.
Remove possible static discharge potential from any objects that
the converter may come in contact with before installation. This
can be accomplished by touching a bare metal chassis rail after
you have turned off the power.
2.
Locate an unused USB host port on your PC, connect USB cable
from the USB host port to the Isolation Adapter’s upstream port.
3.
Install USB cable from the Isolation Adapter to the USB device
4.
Install the Wall / Optional DIN Rail Mounting Kit
Type
Specifications
Connectors
Speed
USB Signals
Isolation
Power Consumption
Operating Temperature
Operating Humidity
Storage Temperature
Upstream: Type-A USB1.1
Downstream: Type-B USB1.1
Full-speed: 12Mbps
Low-speed: 1Mbps
D+, D-
2,500Vrms
5V/120mA max.
0 to 60
8
C (32 to 140
8
F)
5 to 95% RH
-20 to 85
°
C (-4 to 185
°
F)
6. Specifications
