ANTAIRA STE-501C, Руководство пользователя

Страница: 17 / 51

User’s Manual Version 1.
4
Serial to Ethernet Device Server
STE-501C
Copyright © 201
7
Antaira Technologies, LLC
All rights reserved.
16
LINK Mode Setup Configure STE-501C as TCP server
：
(Figure 3.10)

Type 1 from “ Input choice and enter (1~4): ” of COM1

Type 1 in the “ Input choice(1~5) and enter
：
”

Input local port in the “ Please input local port
：
”
1.If one want to enable IP filter
：

Input y in the “ Do one want to enable IP filter(y/n)? ”

Input source IP in the “ Please input Filter_IP
：
”

Double click “ Enter ” key
2.If one don’t want to enable IP filter
：

Input n in the “ Do one want to enable IP filter(y/n)? ”

Double click “ Enter ” key

Input idle time in “ Please input idle time to send TCP alive packet(4*10sec)
：
”(If one input 2 ->the
sending TCP keep alive packet period will be change to 2*10 sec)
Note:
1. IP filtering function is disabled if setting FILTER_IP to “0.0.0.0”.
2. IP filter is disabled by default
3. If IP filter is enabled, only source IP assigned can connect to STE-501C.
Figure 3.10 Link Mode-TCP server setup