15
Hardware Installation
In this section, instructions on how to install the 1 10/100TX + 100FX w/ 1 PoE Injector
Industrial Media Converter will be provided.
Installation Steps
1. Unpack the Industrial Media Converter.
2. Check if the DIN-Rail is installed on the Industrial Media Converter. If the DIN-Rail is
not attached on the Industrial Media Converter, please refer to the
DIN-Rail
Mounting
section for DIN-Rail installation. If wall mounting is desired, please refer to
Wall Mount Plate Mounting
section for wall mount plate installation.
3. To mount the Industrial Media Converter on a DIN-Rail track or wall, please refer to
the
Mounting Installation
section.
4. Power on the Industrial Media Converter. Please refer to the
Wiring the Power
Inputs
section for information on how to wire for power. The power LED on the
Industrial Media Converter will light. Please refer to the
LED Indicators
section for
LED light indication.
5. Prepare the twisted-pair, straight through Category 5e/above cable for Ethernet
connection.
6. Insert one side of the RJ-45 cable into the Industrial Media Converter Ethernet port
and the other side to a network device Ethernet port, e.g. Switch, PC or Server. The
UTP/STP port (RJ-45) LED on the Industrial Media Converter will light when the
cable is connected to the network device. Please refer to the
LED Indicators
section
for LED light indication.
7. When all connections are set and all LED lights are normal, the installation is
complete.
