16-Port RS-232 Multi Serial PCI Card
3
Internal 5V: Power source is +5VDC,
from PCI golden finger (motherboard’s
PCI slot)
JP1- COM Ports Swapping Selector: These jumpers were used to
swap Serial Ports S1-S8 and S9-S16. Please keep them at the
default factory settings since it may confuse you about the COM
Port Numbers.
JP1
Settings
No Swapping. The COM ports will be
mapped to S1 to S16 normally.
(default)
The COM ports will be swapped as
follows:
S1 S9
S2 S10
S3 S11
S4 S12
S5 S13
S6 S14
S7 S15
S8 S16
1.
2.
Note 1:
PLEASE DO NOT LET WINDOWS AUTO SEARCH THE DRIVERS ON THE CD, it will
cause problems because the INF files will be conflict in this case. Instead,
please browse to the correct location (folder) manually to make sure the
correct drivers are chosen and installed correctly.
Note2: Windows NT driver Installations
To install the Windows NT driver, please go into WinNT4 sub-directory and run
(double click) Install_Serial.exe to install all Serial Port Drivers.
I5V
X5V
X12V
I12V
4. Software Installation
A0
A1
B0
B1
A0
A1
B0
B1
