2-Port RS422/485 Serial PCI Card
5
JP1 (for S1)
JP2(for S2)
Description
TXD Control is Automatic
(Default)
TXD Control is Manual
(Needs to be Configured
Manually in the Device
Manager)
5.
Factory Use Only Connectors (J1):
This connector is only used for factory production purpose, please
don’t install any jumper or cable on it!
1.
Turn the system power OFF before installation!
2.
Use static electricity discharge precautions.
3.
Remove the chassis cover from your computer
4.
Locate an unused PCI slot (typically white or ivory) and remove
the corresponding slot cover from computer chassis.
5.
Plug the RS422/485 PCI card to the unused PCI expansion slot
and attached the I/O card bracket to the computer chassis
screw.
6.
Put the chassis cover back on the computer.
7.
Turn ON the power of your computer and peripherals.
8.
Proceed with Software Driver Installation.
4. Installing the RS232/422/485 PCI Card
485TR
MAN AUT
485TR
MAN AUT
