Antaira Technologies - Industrial Ethernet Switches
LNX-800AG-E Series - Hardware Manual - v1.0
2.3 Top View Panel
Figure 2.3, below, shows the top panel of the product series:
Figure 2.3 - Top View Panel
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that display the power status and
network status. Each LED indicator has a different color and has its own specific meaning, see below in Table 2.1.
LED
Color
Description
P1
Green
On
Power Input 1 is active
Off
Power Input 1 is inactive
P2
Green
On
Power Input 2 is active
Off
Power Input 2 is inactive
Fault
Red
On
Power Input 1 or 2 is inactive
Off
Both power input 1 and 2 are active
LAN Port 1~8
Green
On
Connected to network
Flashing
Networking is active
Off
Not connected to network
Green
On
Connected to network, 1000Mbps
Off
Not connected to network, or connected to network at speed of
10/100Mbps.
Table 2.1 - LED Indicators
Note: “P1” is the abbreviation for “Power 1”, “P2” is for “Power 2”, “LNK” is for “Link”, and “ACT” is for “Activity”.
5
