ANTAIRA LNP-800AGH Series, Руководство по оборудованию

Страница: 9 / 21

Antaira Technologies - Industrial Ethernet Switches
LNP-800AGH Series - Hardware Manual - v1.0
Figure 2.3 - Top View Panel
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that display the power status and
network status. Each LED indicator has a different color and has its own specific meaning, see below in Table 2.1.
LED Color Description
P1 Green
On Power Input 1 is active
Off Power Input 1 is inactive
P2 Green
On Power Input 2 is active
Off Power Input 2 is inactive
Fault Red
On Power Input 1 or 2 is inactive
Off Power Input 1 and 2 are both functional
LAN Port 1~8
(Upper LED)
Green
On Connected to network, 10/100/1000Mbps
Flashing Networking is active
Off Not connected to network
LAN Port 1~8
(Lower LED)
Green
On The port is supplying power to the powered-device
Off No powered-device attached or power supplying fails
Table 2.1 - LED Indicators
Note: “P1” is the abbreviation for “Power 1”, “P2” is for “Power 2”, “LNK” is for “Link”, and “ACT” is for “Activity”.
5