Antaira Technologies - Industrial Ethernet Switches
LNX-1202G-10G-SFP User Manual V1.0
7
To connect the transceiver and LC cable, please follow the steps below:
First, insert the SFP transceiver module into the SFP slot as shown below in
Figure 2.7
.
Notice that the triangle mark is at the bottom of the SFP slot.
Figure 2.8
shows the SFP
transceiver module was inserted.
Second, insert the fiber cable of the LC connector into the transceiver as shown below in
Figure
2.9.
To remove the LC connector from the transceiver, please follow the steps shown below:
1. Press the upper side of the LC connector from the transceiver and pull it out to release as
shown below in
Figure 2.10
.
2. Push down the metal clasp and pull the transceiver out by the plastic part as shown below in
Figure 2.11
.
Figure 2.7 - Transceiver to the SFP Module
Figure 2.8 - Transceiver Inserted
Figure 2.9 - LC Connector to the Transceiver
Figure 2.10 - Remove LC Connector
Figure 2.11 - Pull Out from the SFP Module
