Antaira Technologies - Industrial Ethernet Switches
LNP-1002G-10G-SFP-24 User Manual V1.1
5
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that
display the power status and network status. Each LED indicator has a different color and has its
own specific meaning, see below in Table 2.1.
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input is inactive
Fault
Red
On
Power input 1 or 2 is inactive
Off
Both power input 1 and 2 are active
Link Activity
(SFP Port)
Green
On
Connected to the network
Flashing
Networking is active with 10G
Off
Not connected to the network
LAN Port 1 ~ 8
(Upper LED)
Green
On
Connected to network, 10/100/1000Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 1 ~ 8
(Lower LED)
Green
On
The port is supplying power to the powered-device
Off
No powered-device connected or power supplying fails
2.5 Ethernet Ports
RJ45 Ports (Auto MDI/MDIX):
The RJ45 ports are auto-sensing for 10/100/1000Base-Tx devices connections. Auto MDI/MDIX
means that the switch can connect to another switch or workstation without changing the straight-
through or crossover cabling. See the figures shown on the top of the next page for straight-through
and crossover cabling schematics.
Table 2.1
