ANTAIRA LNP-0802C-SFP Series Скачать руководство пользователя страница 5

Страница: 5 / 24

Antaira Industrial Ethernet Switches

LNP-0802C-SFP series User Manual V1.2

1. Overview

Antaira Technologies’ LNP-0802C-SFP industrial PoE+ Gigabit unmanaged Ethernet switch series

is IP30 rated and DIN-Rail mountable. It comes with 6*10/100Tx which support IEEE802.3at with

high power PoE up to 30W/port, and 2*GigE combo ports (2*10/100/1000Tx RJ45, and 2*100/100

SFP slots for fiber), making it ideal for applications that demand a high bandwidth and long

distance communication.

This product series provides a high EFT and ESD protection to prevent any unregulated voltage

and is suitable for harsh environments. It supports the power redundancy feature by having a dual

power input design and a reverse power polarity protection. In addition, the built-in relay warning

function alerts maintainers when power failures occur.

The LNP-0802C-SFP series includes two models: one with an operating temperature range of -10

to 70°C, and the other one with an extended operating temperature range of -40 to 75°C. It is a

perfectly designed product to fulfill any special needs for industrial automation, outdoor

applications and harsh weather environments.

1.1 Key Features



System Interface/Performance



All RJ-45 ports support auto MDI/MDI-X function



Embedded 6*10/100Tx (PSE 30W/Port), 2*Gigabit combo ports (2*10/100/1000Tx

RJ45, and 2* 100/1000 SFP slots)



Store-and-forward switching architecture



8K MAC address table



Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC



Power Input



DC 48 ~ 55V redundant power



Operating Temperature



Standard operating temperature model: -10°C ~ 70°C



Extended operating temperature model (–T): -40°C ~ 75°C



Case/Installation



IP-30 protection



DIN-Rail and wall mount design

Содержание LNP-0802C-SFP Series

























Результаты поиска

Содержание LNP-0802C-SFP Series

Отзывы:

Похожие инструкции для LNP-0802C-SFP Series

Бренды по названию

Популярные бренды

ANTAIRA LNP-0802C-SFP Series, Руководство пользователя

Результаты поиска

Содержание LNP-0802C-SFP Series

Отзывы:

Похожие инструкции для LNP-0802C-SFP Series

Бренды по названию

Популярные бренды