Antaira Technologies - Industrial Ethernet Switches
LNP-0501 Series User Manual V2.2
7
Fiber Port
The fiber port of SC type connector can work in multi-mode or single-mode. When connecting the
fiber port to another one, please connect accordingly by following the figure below. The wrong
connection will cause the port to not work normally.
**ATTENTION
This is a Class 1 Laser/LED product. Don’t stare into the Laser/LED beam.
2.6 Cabling
Twisted-pair segments can be connected with an unshielded twisted pair (UTP) or shielded
twisted pair (STP) cable. The cable must comply with the IEEE 802.3u 100Base TX standard
(e.g. Category 5, 5e, or 6). The cable between the equipment and the link partner (switch, hub,
workstation, etc.) must be less than 100 meters (328 ft.) long.
Fiber segment using single-mode connector type must use 9/125μm single-mode fiber
cable.
Fiber segment using multi-mode connector type must use 50 or 62.5/125 μm multi-mode
fiber cable.
Figure 2.6 – Fiber Port Cabling
