Antaira Technologies - Industrial Ethernet Switches
LMP-0501-XX-24-V2 Series Hardware Manual V1.1
2
➢
IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group
➢
Supports IPv4/IPv6, RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP,
HTTPS, SSH/SSL, TFTP
➢
MODBUS TCP for SCADA system integration
Port Configuration
➢
Status, statistics, mirroring, rate limiting, event syslog
Event Handling
➢
Event notification by Email: Cold/Warm Start, Power Failure, Authentication, SNMP
trap and Fault Alarm Relay Output
Software Upgrade via TFTP and HTTP
Configuration Backup
– USB Port
1.3 Product Hardware Features
System Interface and Performance
•
All RJ-45 ports support auto MDI/MDI-X function
•
Ethernet connectivity 4*10/100Tx RJ45 ports and 1*100Fx (SC/ST) fiber ports with
multi-mode (2km) or single-mode (30km)
•
Store-and-forward switching architecture
•
8K MAC address table
•
Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC
Power Input
•
DC 12~36V redundant, with a 6-pin removal terminal block
•
It is recommended to use a UL listed industrial power supply
Operating Temperature
•
Standard Operating Temperature Model: -10°C to 70°C
•
Extended Operating Temperature Model: -40°C to 75°C
Case/Installation
•
IP30 protection
•
DIN-Rail and wall mount design
