Antaira Technologies - Industrial Ethernet Switches
LMP-1002G-10G-SFP-24 Hardware Manual V1.0
1
1. Introduction
All Antaira industrial managed switches come with a pre-
installed “user-friendly” web console
interface, which allows users to easily configure and manage the units, whether one is using a serial
console and Command Line Interface (CLI) commands like Telnet, SSH, HTTP (Web GUI) or Simple
Network Management Protocols (SNMP).
1.1 Product Overview
Antaira Technologies’ LMP-1002G-10G-SFP-24
is a 10-port industrial Gigabit PoE+ light layer 3
managed Ethernet switch embedded with 8*10/100/1000Tx Ethernet ports that support
IEEE802.3at/af for a maximum of 30W/port and 2*1G/10G dual rate SFP+ slots for fiber connections.
The LMP-1002G-10G-SFP is a fully manageable light layer 3 Ethernet switch that is pre-loaded with
a user-friendly web management console design. It supports the ring network redundancy function
using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol
that has a <50ms network recovery time. The advanced network filtering and security functions, such
as, IGMP, VLAN, QoS, SNMP, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase
determinism and improve network management for remote SCADA systems or control networks.
The LMP-1002G-10G-SFP-24 is IP30 rated and DIN-rail mountable. It also provides high EFT and
ESD protection for industrial networking applications, such as power/utility, water wastewater,
oil/gas/mining, factory automation, security surveillance, ITS and any other outdoor or harsh
environment.
1.2 Product Software Features
Network Redundancy
➢
STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for
network redundancy
Network Management
➢
Web UI based management, SNMP v1/v2/v3, Serial Console
➢
Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,
broadcast storm control, DiffServ
➢
IEEE802.1q VLAN tagging, port-based VLAN support
