Antaira Industrial Ethernet Switches
LMP-0501-24 Series User Manual V1.1
75
7. Technical Specification
Table 7.1 has the technical specifications for Antaira’s LMP-0501-24 series: 5-Port industrial
PoE+ managed Ethernet switch with 4*10/100Tx (30W/Port), and 1*100Fx (SC/ST); 12~36VDC
power input.
Standards
IEEE 802.3
10Base-T 10Mbit/s Ethernet
IEEE 802.3u
100Base-Tx, 100Base-Fx, Fast Ethernet
IEEE 802.3x
Flow Control for Full Duplex
IEEE 8023.af
Power-over-Ethernet
IEEE 802.3at
Power-over-Ethernet Plus (Enhanced)
IEEE 802.1d
STP (Spanning Tree Protocol)
IEEE 802.1w
RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s
MTP (Multiple Spanning Tree Protocol)
ITU-TG.8032 /
Y.1344
ERPS (Ethernet Ring Protection Switch)
IEEE 802.1q
Virtual LANs (VLAN)
IEEE 802.1x
Port based Network Control, Authentication
IEEE 802.1ad
Stacked VLAN, Q-in-Q
IEEE 802.1p
QoS/CoS Protocol for Traffic Prioritization
Switch
Protocol
CSMA/CD,IGMPv1/v2,SNMPv1/v2,TFTP,SNTP,SMTP,RARP,
Syslog
Data Process
Store and Forward
Transfer Rate
14,880 pps for 10Base-T Ethernet port
148,800 pps for 100Base-TX Fast Ethernet port
Packet Buffer
1Mbits
MAC Table
8K
Jumbo Frame
-
Flow Control
IEEE 802.3x for full duplex mode, back pressure for half duplex
mode
VLAN Groups
0 ~ 4094
IGMP Groups
Up to 256
Port Interface
Ethernet (RJ45) Port
4*10/100BaseTx (PSE: 30W/Port) auto negotiation speed,
Full/Half duplex mode, and auto MDI/MDI-X connection
PoE Pin Assignment
V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, MDI Alternative A)
Fiber Port
1*100Fx (SC or ST connector), with Multi-mode in 2Km -
50/125um ~ 62.5/125um; or Single-mode in 30Km - 9/125um ~
10/125um.
Wavelength
1310nm (Multi or Single mode)
RS232 Serial
Console
1*RS232 in RJ45 connector with console cable, 115.2Kbps, 8,N,1