Antaira Technologies - Industrial Media Converter
IMC-C1000-SFP Series User Manual V1.2
10
Follow the steps below to learn how to hang the industrial Ethernet media converter.
1. Use the screws to install the DIN-Rail bracket on the rear side of the industrial Ethernet media
converter.
2. To remove the DIN-Rail bracket, do the opposite from step 1.
3. After the DIN-Rail bracket is installed on the rear side of the media converter, insert the top of
the DIN-Rail on to the track as shown below in Figure 3.2.
4. Lightly pull down the bracket on to the rail as shown below in Figure 3.3.
5. Check if the bracket is mounted tightly on the rail.
6. To remove the industrial Ethernet media converter from the rail, do the opposite from the above
steps.
Figure 3.3
Stabilize the Media Converter on the DIN-Rail
Figure 3.2
Insert the Media Converter on the DIN-Rail
